Bobcat vs excavator hire comes down to the task. Hire a bobcat (skid steer) when the job is mostly moving, loading, spreading and levelling material. Hire an excavator when the job is mostly deep, precise digging. Hire both when the job has plenty of each and two operators can work at once.
Choosing by task rather than by name helps you avoid hiring the wrong machine. A “digger” is a poor fit for a job that is really about shifting a pile of soil, and a bobcat can’t cut a deep trench cleanly.
We’re DB Bobcat and Tipper Hire, a locally owned owner-operator business. David works across Melbourne’s western suburbs, including Werribee, Laverton, Altona Meadows, Wyndham Vale and Taylors Hill. This guide covers residential and small commercial jobs.
Key takeaways
- Task decides machine:
Moving, loading and levelling point to a bobcat. Depth, trenches and footings point to an excavator.
- Access matters:
Measure your gates and turning room first. Mini excavators fit tight spots more easily.
- Wet hire for most:
An operator comes with the machine, but fuel charges and liability still depend on the hire agreement, so read it.
- Itemise the quote:
Delivery, minimum hours, attachments and disposal are where costs blow out.
- Two machines, two operators:
A combo pays off most when both run at the same time, though separate job phases can justify it if the total cost is lower.
Bobcat or excavator hire: what’s the real difference?
A bobcat moves material, an excavator digs it
A skid-steer loader is a fast loader and surface-work machine. It scrapes, strips, scoops, carries, spreads and backfills. An excavator has a boom, arm and bucket that dig below the machine while the upper structure rotates, which makes it the tool for trenches, footings, pools and stumps.
One clarification. Bobcat is a brand, and it also makes excavators and compact track loaders. In this article, “bobcat” means a skid-steer loader, so the comparison is a skid steer against a mini excavator.
Side-by-side comparison
Task
Bobcat (skid steer) Excavator
Verdict Digging
Shallow scraping and stripping Trenches, footings, pools, stumps Excavator
Loading
Fast scooping and carrying Slower swing-and-dump cycle Bobcat
Grading
Spreading, levelling, finish work Rough grading, slopes, ditches Bobcat
Light demolition
Good with a breaker or grapple Capable
Bobcat
Heavy demolition Limited
More reach and controlled force Excavator
Soft or uneven ground Wheeled models can rut Tracks spread the weight Excavator
Attachments
Forks, augers, breakers, grapples, sweepers Digging, reaching, lifting and breaking tools Bobcat for range
The one-line rule
Mostly moving, levelling, clearing or light demolition: bobcat. Mostly depth, trenching, footings or heavy breaking: excavator. If you can’t say which describes your job, you haven’t scoped it yet.
Which machine fits your site access and ground conditions?
Will it fit through your gate?
It depends on the machine, and you need to check before you book. Mini excavators, especially zero or reduced tail swing models, work well in backyards and side access. Some have retractable tracks for narrow gates. A bobcat needs turning room to work its loader arms.
Measure your gates, paths, overhead clearances and turning areas. Confirm the machine’s dimensions with the supplier, then check operating weight against the surface it has to cross. A machine that fits the gate but cracks your pavers isn’t a fit.
Before any digging starts, check for underground services through Before You Dig Australia. Also tell the supplier about ground conditions, and get any older structure assessed for asbestos before demolition work begins.
Clay, mud and soft ground
Melbourne’s west is clay-heavy, and wet clay punishes wheeled machines. Tracks spread the weight and give better stability on soft, sloped or uneven ground. Wheeled skid steers are quick on firm, level ground but can rut lawns and finished surfaces.
How deep and how precise?
Shallow stripping and levelling suit a bobcat. Deep, accurate cuts near fences, pipes or structures suit an excavator. Pick the smallest excavator that still reaches the depth you need. Smaller machines are easier to transport and move around, but they give up depth and lifting capacity.
How much does bobcat and excavator hire cost?
Wet hire vs dry hire: who’s driving?
Wet hire includes an operator. Dry hire is machine only, so fuel, operating skill, maintenance risk and insurance generally fall on you, depending on the hire agreement. Dry hire is often estimated at roughly 40-60% of the equivalent wet hire cost before you add an operator (FlowSpec).
Dry looks cheaper on paper. But an operating mistake near a pipe or a fence can outweigh the saving. If you’re considering dry hire, check your own experience, the site hazards and the hire conditions first.
What the machines typically cost
Melbourne is often around 10-20% above the national average (FlowSpec). Treat all of this as a guide only. Rates vary with access, booking length and availability.
The extras that blow out a quote
The hourly rate is rarely the final number. Watch for these:
- Float or delivery, each way
- Minimum hours
- Attachments such as breakers and augers
- Fuel
- Disposal
- Waiting time
Bobcat float charges are approximately $150 to $350 for short metro moves (FlowSpec).
Ask every supplier for a detailed, itemised quote that lists all of it, and hold anyone you hire to that standard.
Should you hire a bobcat and excavator together?
When running both machines pays off
Often, yes, when both machines work at the same time. The excavator digs while the bobcat shifts spoil, spreads aggregate or loads trucks. That suits pool sites, foundations, drainage and building pads with a lot of spoil.
Two machines in parallel can cut hire days and labour, even at a higher daily rate. Separate job phases can also justify two machines when the total delivered cost comes out lower.
When one machine is enough
One machine wins when the excavator can load straight into a truck, when spoil can stay beside the trench, or when the bobcat would sit idle. Run a simple test: the extra cost of the second machine has to be less than the labour, time and delays it saves. If it isn’t, don’t book it.
What to confirm before booking a combo
Confirm you have two qualified operators, a combined rate, delivery charges, minimum periods and whether attachments are included. Without two operators working together, most of the productivity advantage disappears.
Which machine do typical residential and small commercial jobs need?
Job-by-job quick picks
- Standard residential concrete driveway removal and replacement:
Bobcat. It breaks, scrapes and loads out the old slab, then preps the base. Thick or heavily reinforced slabs call for an excavator with a breaker.
- Backyard levelling and soil removal:
Bobcat with a tipper. This is moving and spreading work.
- Shed demolition:
Bobcat. A lightweight structure is light demolition.
- Small trench or drainage run: Excavator. You need controlled
- Pool excavation:
Excavator for the dig, with a bobcat helping shift spoil.
- Carpark or warehouse clean-up: Bobcat. It’s loading and
Where a bobcat and tipper covers more than you’d expect
A bobcat and tipper under one operator handles shallow excavation, site preparation, soil, rock and concrete removal, light demolition and rubbish removal. You don’t coordinate multiple contractors, which saves time and money.
There are limits. For deep trenching or a large pool dig, an excavator is the right tool.
How DB Bobcat and Tipper Hire fits in
David is an owner-operator and personally handles every job. We know western suburbs clay and estate sites, and we schedule flexibly to minimise disruption.
Pick the machine for the job, not the name
Bobcat for moving and levelling. Excavator for digging deep and precise. Both when the job has plenty of each and two operators can work at once. That’s the key difference when choosing between bobcat and excavator hire.
Wet hire suits most homeowners, and everything should be itemised in the quote. Don’t overbook. Hire what the job actually needs, and nothing more.
If you’re in Werribee, Laverton, Altona Meadows, Wyndham Vale, Taylors Hill or anywhere else in Melbourne’s west, get in touch with our team for a quote.
Frequently Asked Questions
What should you check before digging starts?
You should check for underground services through Before You Dig Australia before digging starts. Tell your supplier about the ground conditions too.
Can a bobcat and tipper handle soil removal?
Yes, a bobcat and tipper can handle soil removal as well as shallow excavation and site preparation. It can also remove rock, concrete and rubbish, but deep trenching calls for an excavator.
Which machine should you hire to remove a reinforced concrete slab?
You should hire an excavator with a breaker for a thick or heavily reinforced slab. A bobcat can break, scrape and load out a standard residential concrete driveway.
What risks should you consider with dry hire?
With dry hire, operating skill, maintenance risk and insurance generally fall on you, depending on the hire agreement. Check your experience, site hazards and hire conditions before booking.
